---
title: "Induction cooktop repair"
description: "Whirlpool induction cooktop repair — induction is a different appliance under the same glass: coils, an inverter and a cooling fan, rather than a resistance…"
url: "https://whirlpoolmiami.support/services/induction-cooktop-repair/"
date_modified: "2026-09-06"
Appliance type: "Cooktops"
---


# Whirlpool induction cooktop repair

### Half of these are not broken

Induction is a coil, an inverter and a cooling fan under the same glass, and it is the cooking appliance most often reported dead when it is working perfectly. A pan that is not ferrous, or one whose base is smaller than the zone expects, produces exactly the behavior of a failure — and Whirlpool publishes a reading for that case, which it means literally. The other common cause is heat: an induction top fitted over a drawer or into a cabinet without the clearance in the specification will overheat and shut itself down, reliably, every time the kitchen is busy.

What this involves

This make publishes a reading for unsuitable or missing cookware, and it means it

An induction top fitted over a drawer with no clearance overheats and shuts itself down

Where a replacement top costs less than the inverter board, you will hear that

Test the cookware

A magnet on the base, and the pan diameter against the zone. This make publishes a specific reading for unsuitable or absent cookware, and it means what it says.

Read the code

Whirlpool publishes E-prefixed and F-prefixed sets for induction and they do not mean the same things as the electric cooktop list. The model decides which applies.

Check the cooling path

The fan and its intake underneath the cabinet. An induction top installed over a drawer with no clearance overheats and shuts itself down, and that is an installation problem.

Measure the coils and the sensors

Individually, so a single dead zone is not treated as a whole-board failure.

Be straight about the inverter board

It is the expensive part. Where the honest answer is that a replacement top costs less than the board, you will hear that.

### How do I know if my pans work on it?

Put a magnet on the base. If it holds firmly the pan will work; if it barely holds it will heat poorly and the zone may not recognize it at all. Base diameter matters too — a small pan on a large zone is read as no pan.

### The whole top shut off in the middle of cooking.

That is usually thermal protection rather than a failure, and the cause is almost always clearance or a blocked cooling path underneath. It is worth diagnosing, because an inverter board on these is expensive enough that the alternative is a new top.

### Is the inverter board worth replacing?

Sometimes it is not, and that is said plainly. On a machine at this price a new inverter can approach a new cooktop, so you get the part figure and the replacement figure side by side before deciding.

---

**[Read full article: Induction cooktop repair](https://whirlpoolmiami.support/services/induction-cooktop-repair/)**